제품소개

제품소개

PCIe-7396

ㆍ▷ 96-CH High-Driving DIO Card

ㆍ▷ Supports a 32-Bit 5 V PCI Express bus

ㆍ▷ 96-CH digital TTL inputs/outputs

ㆍ▷ High driving up to 48 mA (sink) and 15 mA (source)

Manual

Data sheet

Features
▷Supports a 32-Bit 5 V PCI Express bus
▷96-CH digital TTL inputs/outputs
▷High driving up to 48 mA (sink) and 15 mA (source)
▷Emulates 4/2 industry standard 8255 PPI (mode 0)
▷Ports are independently configurable as input or output
▷External latch signal available for digital inputs
▷Output status read back
▷Known power-up states
▷Onboard 8254 timer/counter chip
▷1-CH 16-Bit event counter for external signal
▷1-CH 32-Bit timer for timed interrupt generation
▷Change-of-state (COS) interrupt
▷Multiple programmable interrupt sources
▷Compact, half-size PCB

Specification & Introduction

Digital I/O
▷Number of channels
 96 input/output
▷Compatibility: 5 V/TTL
▷Power-on state: input
▷Digital logic levels
 Input high voltage: 2-5.25 V
 Input low voltage: 0-0.8 V
 Output high voltage: 2.4 V minimum
 Output low voltage: 0.5 V maximum
▷Output driving capacity
 Source current: 15 mA
 Sink current: 48 mA
▷Data transfers: programmed I/O
Interrupt
▷Interrupt #0 sources
 P1C0
 P1C3
 16-Bit event counter
 Change-of-state detection on any bit of PPI 1 & PPI 2
▷Interrupt #1 sources
 P2C0
 P2C3
 32-Bit timer (based on 2 MHz internal clock),
 Change-of-state detection on any bit of PPI 3 & PPI 4

General Specifications
▷I/O connector : One 100-pin SCSI-II female
▷Operating temperature: 0˚C to 60˚C (32˚F to 140˚F)
▷Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F)
▷Relative humidity: 5% to 95%, non-condensing
▷Power requirements
▷Device
PCIe-7396 
▷+5 V
450 mA typica
▷Dimensions (not including connectors)
138.96 mm x 98.4 mm

Ordering Information

▷PCIe-7396
96-CH High-Driving DIO Card
Terminal Boards & Cables
▷DIN-100S-01
Terminal Board with One 100-pin SCSI-II Connector
and DIN-Rail Mounting (Cables are not included.)
▷DIN-96DI-01
96-CH Isolated DI Terminal Board with DIN-Rail
Mounting (Cables are not included.)
▷ACL-102100-1
100-pin SCSI-II cable (mating with AMP-787082-9), 1 M