제품소개

제품소개

DIN-24P-01/TB-24P-01

ㆍ▷ Terminal Boards with 24 Opto-Isolated Digital Inputs

ㆍ▷ 24-CH opto-isolated digital inputs

ㆍ▷ 50-pin opto-22 compatible connector

ㆍ▷ Non-polarity digital input range

Data sheet

Features
▷ 24-CH opto-isolated digital inputs
▷ 50-pin opto-22 compatible connector
▷ Non-polarity digital input range
▷ Isolated input voltage up to 24 V
▷ 5000 VRMS optical isolation
▷ Jumper configurable for voltage input or dry-contact input mode
▷ LED indicator for input status
▷ Screw terminals for easy field wiring
▷ DIN socket is available on DIN-24P-01
▷ 50-pin SCSI-type connector available on DIN-24P-01 to interface 
with ND-6058

Specification & Introduction
▷Input Modes
 Voltage input
 Dry contact input
▷Isolated Digital Input
 Number of channels: 24, maximum
 Maximum input range: 24 V, non-polarity
 Digital logic levels
  0 to 24 V, non-polarity
  Input high voltage: 5 V to 24 V
  Input low voltage: 0 to +1.5 V
 Input resistance:1.2 kΩ @ 0.5 W
 Isolation voltage: 5000 VRMS
▷Dry Contact Input
 Number of channels: 24
 Internal pull-up voltage supply: +5 VDC
▷LED Indicators for Input Status: one per channel
▷I/O Connector
 50-pin ribbon male
 50-pin SCSI-II female
▷Operating Temperature: 0˚C to +60˚C
▷Storage Temperature: -20˚C to +80˚C
▷Relative Humidity: 5% to 95%, non-condensing
▷Power Requirement:
+5 V
40 mA maximum
▷Dimensions
• TB-24P-01: 220 mm x 132 mm x 23 mm (W x L x H)
• DIN-24P-01: 259 mm x 121 mm x 55 mm (W x L x H)

Ordering Information

▷TB-24P/24-01
Terminal Board with 24-CH isolated digital inputs
▷DIN-24P-01
Terminal Board with 24-CH isolated digital inputs and 
DIN-rail mounting
▷Accessory
 Cabling
 ACL-10150: 50-pin flat cable