제품소개

제품소개

PCI-7432/7433/7434

ㆍ▷ 64-CH Isolated Digital I/O PCI Cards

ㆍ▷ Supports a 32-bit 5 V PCI bus

ㆍ▷ 2500 VRMS optical isolation

ㆍ▷ Sink current up to 500 mA on single isolated output

Manual

Data sheet

Features

▷Supports a 32-Bit 5 V PCI bus (PCI-7432/7433/7434)
▷3U Eurocard form factor, CompactPCI compliant
(PICMG 2.0 R2.1) (cPCI-7432/7433/7434)
▷32-CH isolated digital inputs & 32-CH isolated digital outputs
(PCI-7432/7432HIR, cPCI-7432)
▷64-CH isolated digital inputs
(PCI-7433/7433HIR, cPCI-7433)
▷64-CH isolated digital outputs 
(PCI-7434, cPCI-7434/7434P)
▷Isolation Voltage:
      2500 VRMS: PCI-7432/7433/7434
      5000 VRMS: cPCI-7432/7433/7434/7434P
▷Sink current up to 500 mA on single isolated output
▷Isolated input voltage up to 24 V
(PCI-7432/7433, cPCI-7432/7433)
▷Isolated input voltage up to 50 V (PCI-7432HIR/7433HIR)
▷Two external interrupt sources (PCI-7432/7432HIR/7433/
 7433HIR, cPCI-7432/7432RP/7433)

Specification & Introduction

 Isolated Digital Input
▷Number of channels
           32 (PCI-7432/7432HIR, cPCI-7432)
           64 (PCI-7433/7433HIR, cPCI-7433)
▷Maximum input range (Non-polarity)
      24 V, non-polarity (PCI-7432/7433, cPCI-7432/7433)
     Digital logic levels: 0 V to 24 V, non-polarity
           Input high voltage: 5 V to 24 V
           Input low voltage: 0 V to 1.5 V
▷Input resistance
           2.4 kΩ @ 0.5 W (PCI-7432, cPCI-7432, cPCI-7433)
           2.4 kΩ @ 1 W (PCI-7433)
           4.7 kΩ @ 0.5 W (PCI-7432HIR)
           4.7 kΩ @ 1 W (PCI-7433HIR)
▷Isolation voltage: 2500 VRMS: PCI-7432/7432HIR/
 7433/7433HIR 
 5000 VRMS: cPCI-7432/7433
▷Interrupt sources: digital input channel 0 & 1
▷Data transfers: programmed I/O
 Isolated Digital Output
▷Number of channels
           32 (PCI-7432/7432HIR, cPCI-7432)
           64 (PCI-7434, cPCI-7434)
▷Output type: open collector Darlington transistor
▷Sink current (PCI-7432/7432HIR/7434, cPCI-7434)
           500 mA for single channel @ 100% duty cycle
           500 mA for all channels @ 20% duty cycle
▷Source current (cPCI-7434P)             
      500 mA for single channel @ 100% duty cycle
      260 mA for all channels @ 10% duty
▷Power dissipation: Max. 2.25 W per chip
 (8 DO channels) (PCI-7432/7432HIR/7434, 
 cPCI-7432/7434)
 Max. 1.47 W per chip (8 DO channels)
 (cPCI-7434P)
▷Supply voltage: 5-35 V
▷Isolation voltage: 2500 VRMS
▷Data transfers: programmed I/O
 General Specifications
▷I/O connector: 100-pin SCSI-II female
▷Operating temperature: 0˚C to 60˚C (32˚F to 140˚F)
▷Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F)
▷Relative humidity: 5% to 95%, non-condensing
▷Power requirements
 PCI-7432/7432HIR, cPCI-7432
530 mA typical
 PCI-7433/7433HIR,  cPCI-7433
500 mA typical
 PCI-7434, cPCI-7434P
560 mA typical
▷Dimensions (not including connectors)
           156 mm x 106 mm (6.08" x 4.13") 
 (PCI-7432 & PCI-7432HIR)
           175 mm x 107 mm (6.82" x 4.17") 
 (PCI-7433, PCI-7433HIR)
           156 mm x 106 mm (6.08" x 4.13") (PCI-7434)
           156 mm x 106 mm (6.08" x 4.13") (PCI-7434P)
           160 mm x 100 mm (6.24" x 3.9") (cPCI-7432/7433/7434)

Ordering Information

▷PCI-7432
32-CH Isolated DI & 32-CH Isolated DO Card
▷PCI-7432HIR
32-CH Isolated DI & 32-CH Isolated DO Card 
with High Input Range
▷PCI-7433
64-CH Isolated DI Card
▷PCI-7433HIR
64-CH Isolated DI Card with High Input Range
▷PCI-7434
64-CH Isolated DO Card
▷cPCI-7433
64-CH Isolated DI Card
▷cPCI-7434
64-CH Isolated DO Card
▷cPCI-7434P
64-CH Isolated DO Card with Source Current
Transistor