제품소개

제품소개

PCI-6120 / 778397-01

ㆍ▷ 1 MS/s, 16-Bit, 4 Analog Input ,Simultaneous-Sampling, Multifunction DAQ

ㆍ▷ Superior integration -- LabVIEW, CVI, and Measurement Studio for Visual Basic and Visual Studio .NET

ㆍ▷ FREE award-winning global services and support at ni.com/support

ㆍ▷ Two 16-bit analog outputs; 8 digital I/O lines; two 24-bit counters; analog triggering

Manual

Data sheet

Features

▷ Superior integration -- LabVIEW, CVI, and Measurement Studio for Visual Basic and Visual Studio .NET
▷ FREE award-winning global services and support at ni.com/support
▷ Two 16-bit analog outputs; 8 digital I/O lines; two 24-bit counters; analog triggering
▷ NI-DAQmx Measurement Services software to simplify configuration and measurements 
▷ 64 million samples of onboard memory
▷ 800 kS/s with NI-DAQ, 1 MS/s in warp mode (see below)

Specification & Introduction

Description
The National Instruments PCI-6120 combines the latest in PC technologies to deliver simultaneous-sampling, high-throughput capabilities for both low and high-channel-count data acquisition and control systems. Using NI-DAQ with warp mode enabled on the ADC, this device achieves 1 MS/s per input channel. Download the LabVIEW example that boosts NI 6120 performance by 25 percent. The NI PCI-6120 is used in a broad variety of applications including high-speed continuous data logging at the full rate of the board; stimulus/response measurements that require synchronization between analog input, analog output, digital I/O, and counter/timer operations; 42 V automotive applications; ultrasound; and dynamic strain applications. The board is accurate for both DC and dynamic signals with as much as 95 dB of spurious-free dynamic range and as little as 39 µV of noise. Each input channel has a 100 kHz antialias filter to improve frequency-domain measurements and analysis. You can turn the filter off from software for transient and pulse measurements. 

Customers who bought these simultaneous sampling products also bought:
High-speed digitizers - Up to 200 MS/s, 14-bit resolution, 512 MB memory
Dynamic signal acquisition - Up to 204.8 kS/s, 24-bit resolution, 8 channels
SC Series - Integrated signal conditioning, 16-bit resolution, up to 8 channels
CompactRIO - Distributed, 100 kS/s, 4 channels

Ordering Information

NI PCI-6120 
▷ 778397-01 NI PCI-6120 S Series Multifunction DAQ Device 

Accessories 
▷ 777643-01 BNC-2110 Noise Rejecting, Shielded BNC Connector Block 
▷ 184749-01 SH68-68-EP Noise Rejecting, Shielded Cable, 1 m