제품소개

제품소개

PCI-6515 / 778835-01

ㆍ▷ Low-Cost Industrial Digital I/O -- 30 V, Bank-Isolated

ㆍ▷ High-reliability industrial feature set: guaranteed industrial 24 V logic thresholds

ㆍ▷ NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.1 and higher

ㆍ▷ Watchdogs, programmable power-up states, change detection, input filters, high current drive

Data sheet

Features

▷ High-reliability industrial feature set: guaranteed industrial 24 V logic thresholds
▷ NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.1 and higher
▷ Watchdogs, programmable power-up states, change detection, input filters, high current drive
▷ Low-cost solution with advanced features for industrial control and manufacturing test applications
▷ 32 bank-isolated sink outputs (±30 VDC, 475 mA for one channel, 125 mA for all channels)
▷ 32 bank-isolated sink/source inputs (±30 VDC) 

Specification & Introduction

Learn more about low-cost industrial data acquisition technologies from NI! The National Instruments PCI-6515 board is an industrial 64-channel isolated digital I/O interface for PCI. The NI PCI-6515, which has 32 digital inputs with optical isolation provided in banks of eight channels, is completely jumper free. You can wire each input bank in a source or sink configuration. The module has 32 sink digital outputs in 8-channel banks. With the PCI-6515, you can input and output at digital levels up to 30 VDC and switch currents of up to 475 mA for one channel per bank. Isolation protects your system from noise and spikes and breaks ground loops. Using the programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators(pumps/valves/motors/relays). Using the digital I/O watchdogs, the board can go to a configurable safe output state if a computer or application fault occurs, providing fault detection recovery. With change detection, the PCI-6115 notifies and triggers your software application when a digital change of state occurs (without polling). Programmable input filters eliminate noise and provide debouncing for digital switches/relays through a software-selectable filter. The NI-DAQmx software technology includes NI DAQ Assistant to create your application with no programming. NI-DAQmx makes it fast and easy to configure your device and take advantage of all the high-reliability industrial features in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET). 

Ordering Information

Device and Professional Accessory Set: Shielded Screw Terminal Connectivity 
▷ 778835-01 NI PCI-6515 Industrial 32 DI, 32 Sink DO Bank Isol. DIO & NI-DAQ 
▷ 185095-02 CABLE ASSY, TYPE SH100-100-FLEX, 2 m 
▷ 776990-01  SCB-100 Noise Rejecting, Shielded I/O Connector Block 

Low-Cost Accessory Set: Unshielded Screw Terminal Connectivity 
▷ 778938-01 NI PCI-6515 Bundle, CB-100 I/O Kit, NI-DAQ 
▷ 777812-01 CB-100 I/O Kit DIN/panel/desktop, 50-pin CB's R1005050 Cable, 1m