제품소개

제품소개

Express-BASE7

ㆍ▷ COM Express® Type 7 Reference Carrier Board in ATX Form Factor

ㆍ▷ Supports up to four 10GBASE-KR and associated sideband signals

ㆍ▷ One PCI Express x16 slot, one PCI Express x4 slot, three PCI Express x1 slots

ㆍ▷ Supports 10GbE adapter card via PCIe x16 slot

Data sheet

Features

▷ Supports up to four 10GBASE-KR and associated sideband signals
▷ Supports NC-SI interface
▷ One PCI Express x16 slot, Two PCI Express x8 slots 
▷ Supports 10GbE adapter card via PCIe x16 slot
▷ Dual BIOS (SPI bus)
▷ Conforms to COM Express® Carrier Design Guide

Specification & Introduction

▷ Core Module Interface
    PICMG COM Express Revision 3.0
    Supports Type7 module in Basic or Compact form factor
▷ Dimension
    305 mm x 244 mm (ATX)
▷ Expansion Busses
    1 PCI Express x16 slot
    2 PCI Express x8 slots
▷ POST LEDs 
    Onboard diagnostics for BIOS POST code data and address on LPC bus
▷ Secondary BIOS
    Onboard socket for secondary SPI flash
▷ Super I/O 
    Winbond WF83627DHG on LPC bus
▷ Digital I/O 
    I2C to GPIO bridge PCA9535
▷ Connectors 
    Two 220-pin board-to-board connectors (Type 7)
▷ 10GbE LAN 
    Up to four 10GBASE-KR and related sideband signals 
    1 PCI Express x16 slot routes signals from COM Express module to 10GbE 
    card adapter (proprietary pinout)
▷ GbE LAN
    10/100/1000BASE-T
    compatible RJ-45 on I/O panel
    GbE_SDP support
▷ NC-SI and IPMI BMC
    NC-SI interface connect COM Express module and IPMI BMC
    IPMI BMC (Lite version) on carrier board 
    Note: support by project basis 
▷ SATA 
    2x SATA ports
▷ USB 
    4x USB 3.0/2.0 ports
▷ Serial Port 
    2x DB-9 on I/O panel (from Winbond Super I/O)
    2x onboard 10-pin header (from COM Express module)
▷ KB/Mouse 
    2x 6-pin mini-DIN
▷ Feature Connectors 
    SMBus, I2C, module control signals
▷ Miscellaneous 
    Reset, Power LED, HDD LED, Buzzer

Ordering Information