제품소개

Features

▷ Carrier board for ADLINK Type 10 modules (excluding nano-TC/TCR)
▷ 2x USB 3.0, 2x USB 2.0, and 1x USB client
▷ Supports DisplayPort and LVDS (eDP optional)
▷ 1x SD card slot
▷ 2x Mini PCIe card slots (one supports mSATA cards)
▷ 2x RJ-45 LAN connectors
▷ Conforms to COM Express Carrier Design Guide rev. 2.0
▷ Supports Smart Battery and 19V adapter power supply

Specification & Introduction

 Form Factor
▷ Core module interface
    PICMG® COM Express® Revision 2.1
    Supports Type 10 modules in Mini form factor
▷ Dimensions
    150 mm x 142 mm 
 BIOS/Debug
▷ POST LEDs
    Onboard diagnostics for BIOS POST code data and address on LPC bus
▷ Secondary BIOS
    Onboard socket for secondary SPI flash
 Audio
▷ Audio Codec
    Realtek ALC262 on DB-Audio2 daughter board (optional)
▷ Interface
    Line-in, Line-out, Mic-in on DB-Audio2 daughter board (optional)
▷ Audio
    Realtek audio codec
▷ Digital I/O 
    SMBus to GPIO bridge
 LAN
▷ GbE controllers
    Dual Intel GbE Controller i210 (one from COM Express module, one from 
    carrier board)
 Connectors and Interfaces
    COM Express: 1x 220-pin (Type 10)
    LVDS: 1x onboard header
    Display Port: 1x onboard header 
    Audio: Mic/Line-in/Line-out on I/O panel
    SATA: 1x SATA connector 
    Connectors and Interfaces (one supports mSATA cards)
    LAN: 2x LAN supports, 10/100/1000BASE-T compatible RJ-45 on I/O panel
▷ USB
    2x USB 3.0 on I/O panel
    2x USB 2.0 on I/O panel
    1x USB client
▷ Serial Port
    2x DB-9 on I/O panel
▷ SD card
    1x socket onboard 
▷ Smart Battery
    1x 10-pin header for Smart Battery management communications (connects 
    to ADLINK BattMan board)
▷ GPIO
    GPIO 8-pin header
▷ Module control bus
    SMBus, I²C
▷ Miscellaneous
    Reset button, Lid button, Sleep button, Power button, Power LED, HDD 
    LED 

Ordering Information

▷ miniBASE-10R 
    COM Express® Type 10 Reference Carrier Board