ㆍ▷ SMARC Reference Carrier Board, to be used along with LEC-iMX6, LEC-BT, LEC-BTS, LEC-BW
ㆍ▷ Reduced board size of 237 mm x 170 mm
ㆍ▷ Compatible with both short and full size SMARC modules
ㆍ▷ Standard support of parallel RGB, single channel LVDS and HDMI displays
Features
▷ SMARC 1.1 compliant carrier board with MXM3 connector
▷ Reduced board size of 237 mm x 170 mm
▷ Compatible with both short and full size SMARC modules
▷ Standard conguration supports parallel RGB, single
channel LVDS and HDMI display
▷ Custom conguration supports dual channel LVDS, HDMI
and third HDMI/DP display
▷ Connector for camera add-on card
▷ ATX power supply
Specification & Introduction
Interfaces
▷ Display
Standard conguration: Parallel LCD, single
channel LVDS (18/24bit), HDMI
Custom conguration: Dual channel LVDS, HDMI,
additional HDMI/DP (see order information)
RGB and LVDS backlight control header
▷ Camera
Connector for plug-in camera add-on card
▷ SDIO
4-bit SD card slot
▷ eMMC
8-bit eMMC interface header
▷ SPI
Off module boot use (optional)
2x SPI interface headers
▷ I²S
3x I²S interface
I2S0 to SGL5000 (default) or AIC3106 (custom
option) to audio connector (ARM)
I2S1 directly to pin header
I2S2 to AlC886 and audio connector (x86)
▷ I²C
4x I²C
Power Management
LCD
Camera
GP
▷ Asynchronous Serial
4x asynchronous serial ports (UART)
▷ Port
Two with 2 wire handshake (RXD, TXD, RTS#, CTS#)
Two with data only (RXD, TXD)
Logic level interface
▷ CAN Bus
2x CAN bus (D-SUB9)
Logic level signals from module based CAN bus
protocol controllers
RXD, TXD only
▷ USB
4x USB2.0 host
1x USB3.0 host (from AFB, module dependent)
1x mini USB2.0 OTG/client
2x USB2.0 via miniPCIe
▷ PCI Express
One PCIe x1 link connector
Two mini PCIe x1 slots
PCIe Gen1, Gen 2 or Gen 3 (module dependent)
PCIe support signals
PCIe wake signal (depending on module)
2x SIM card slots
▷ SATA
2x SATA Gen1, Gen2 or Gen3 (module dependent)
▷ Ethernet
1x RJ-45 10/100/1000 Ethernet
▷ S/PDIF
S/PDIF header for audio
▷ Boot Select Jumpers
Module: SPI/eMMC/NOR/NAND
Carrier: SPI/eMMC/SD Card/SATA
Usage is module dependent
▷ GPIO
12-pin header (including fan control and HDA reset)
▷ Alternate Function
Dedicated AFB connector
▷ Blocks
Pinout is module dependent
(see SMARC specication)
Mechanical and Environmental
▷ Dimension
237 mm x 170 mm (L x W)
▷ Board Connector
MXM 314 pins
Ordering Information
▷ LEC-BASE MINI Standard
2nd Generation SMARC evaluation carrier with triple display
(RGB LCD, SC LVDS and HDMI
▷ LEC-BASE MINI Custom
2nd Generation SMARC evaluation carrier with triple display
(DC LVDS, HDMI and HDMI/DP)