제품소개

Features

▷ SMARC® 2.0 compliant carrier board with MXM3 connector
▷ Board size of 305 mm x 170 mm
▷ Compatible with both short and full size SMARC® 2.0 modules
▷ Supports dual channel LVDS or eDP, HDMI or DP++, DP++
▷ Dual GbE
▷ Connector for MIPI CSI camera add-on card
▷ ATX power supply

Specification & Introduction

 Interfaces
▷ Display
    Single/dual channel LVDS (18/24bit) incl. backlight control or 
    2x eDP, 1x HDMI and DP++ or 2x DP++
▷ Camera 
    SGET connector for MIPI CSI camera add-on card
▷ SDIO
    4-bit SD card slot
▷ SPI
    Off module boot use (optional)
    1x SPI interface header, 1x eSPI/SPI interface header
▷ I²S 
    1x I²S audio codec SGTL5000 (default) or TLV320AIC3107 (configuration option) 
    to audio connector (ARM)
▷ HDA 
    1x HDA to AlC888S-VD2-GR audio codec and audio connector (x86) 
▷ I²C 
    4x I²C
    Power Management
    LCD
    Camera
    GP
▷ Asynchronous Serial Port 
    4x via RS-232 Transceiver
    Two with 2 wire handshake (RXD, TXD, RTS#, CTS#)
    Two with data only (RXD, TXD)
▷ CAN Bus 
    2x CAN bus (D-SUB9)
    Via CAN Transceiver
▷ USB 
    4x USB2.0 (tower)
    2x USB3.0/2.0 (tower)
    1x micro USB2.0 OTG/client
    2x USB2.0 via miniPCIe
▷ PCI Express
    Total of 4x PCIe x1
    2x PCIe x1 slots
    2x mini PCIe x1 slots
    PCIe Gen1, Gen 2 or Gen 3 (module dependent)
    PCIe wake signal (depending on module)
    2x SIM card slots
▷ SATA 
    1x SATA Gen1, Gen2 or Gen3 (module dependent)
▷ Ethernet
    2x RJ-45 10/100/1000 Ethernet (module dependent)
▷ Boot Select Jumpers 
    Module: SPI/eMMC/NOR/NAND 
    Carrier: SPI/eMMC/SD Card/SATA 
    Usage is module dependent
▷ GPIO
    12-pin header (including fan control and HDA reset)
 Mechanical and Environmental
▷ Dimension
    305 mm x 170 mm (L x W)
▷ Board Connector
    MXM 314 pins

Ordering Information

▷ LEC-BASE-2.0
    SMARC evaluation carrier board for SMARC 2.0 
    compliant modules