제품소개

제품소개

ETX-Proto

ㆍ▷ ETX® Reference Carrier Board in ATX Form Factor

ㆍ▷ Four PCI slots, three ISA slots, one Mini PCI slot

ㆍ▷ POST code diagnostics

ㆍ▷ Disk-On-Chip and CF Card support

Data sheet

Features
▷ Four PCI slots, three ISA slots, one Mini PCI slot 
▷ POST code diagnostics
▷ Secondary Multi I/O
▷ Disk-On-Chip and CF card support
▷ Audio amplifier

Specification & Introduction

 Core System
▷ Core Module Interface 
    ETX® ver 2.7 (3.0)
▷ Board Form Factor
    304.8 mm x 190 mm (ATX)
▷ Expansion Busses 
    Four 32-bit PCI slots
    Three16-bit ISA slots
    One Mini PCI slot 
▷ POST LEDs 
    Onboard diagnostics for BIOS POST codes
▷ IDE Support 
    Four IDE devices (two connectors)
▷ Parallel Port 
    One port SSP, ECP, and EEP mode
▷ Serial Port 
    Two 16550 compatible RS-232 ports (COM1/2)
    Two additional ports COM3/4 from secondary multi I/O
▷ KB/Mouse
    Two 6-pin mini DIN connectors (on rear I/O panel) 
▷ USB 
    Four ports (on rear I/O panel) v1.1 and v2.0 compatible
▷ LAN 
    RJ-45 (on rear I/O panel)
 Secondary Multi I/O
▷ FDD 
    Up to two floppy drives
▷ Serial 
    One 16550 compatible RS-232 ports (COM3), one RS-232/422/485 
    Compatible port (COM4) and one IrDA header
▷ Parallel 
    Secondary parallel port
▷ GPIO
    F75111R provides 20 GPIO.
 Audio
    Type: Onboard amplifier with Line-In, Speaker-out and Mic (on rear I/O panel) 
         Line-In/Out, Speaker-out
 Video
    VGA: DB25 connector for analog VGA displays (on rear I/O panel)
    LVDS: Onboard header supporting 36-bit LVDS
    TV-out: Onboard header for PAL/NTSC TV 
         TV-out (NTSC, PAL), LVDS 32-bit 
 POST Code Display
    LED: 2-digit 7-segment LED display
    Function: Displays POST (Power On Self Test) code 
 Power and Operation
    Connectors: ATX and AT onboard
    Switches: Onboard RESET and ATX switch

Ordering Information

▷ ETX-Proto 
    ETX® Reference Carrier Board in ATX form factor
    (includes CF socket assembly, UDMA HDD cable, SATA cable, 
    FDD cable, TV-out cable)