제품소개

Features

▷ PXI specifications Rev.2.2 compliant (PXI-98x6)
▷ Supports 5 V and 3.3 V PCI signals
▷ Supports the 32-bit /66 MHz PCI interface
▷ 4 channels of simultaneous single-ended analog input
▷ 16-bit high resolution A/D converter
▷ Up to 10 MS/s, 20 MS/s, and 40 MS/s per channel
▷ 512 MB on-board memory for data storage
▷Software selectable 50 Ω or 1 MΩ input impedance
▷ Programmable input voltage range: ±0.2 V / ±1 V or
    ±1 V / ±5 V
▷ 5.1 MHz, 9.6 MHz, and 20 MHz analog input bandwidth for the 
    PCI/PXI-9816, PCI/PXI-9826 and PCI/PXI-9846, respectively
▷ Multiple module synchronization via the PXI trigger bus or 
    SSI (System Synchronization Interface)
▷ Supports scatter-gather DMA transfer
▷ 89 dBc SFDR, 79 dBc SINAD and 12.9-bit ENOB (PXI-9816)
▷ Fully auto-calibration

Specification & Introduction

 Timebase
▷ Sample clock sources
    Internal: on-board oscillator
    External: CLK IN (front panel SMB connector), PXI Trigger Bus[0..7], PXI 10 MHz, 
    PXI Star, SSI Bus
▷ Timebase frequency range
    PCI/PXI-9816: 1 MHz - 10 MHz
    PCI/PXI-9826: 1 MHz - 20 MHz
    PCI/PXI-9846: 1 MHz - 40 MHz
 Dedicated External Clock Input From Panel
▷ Connector type: SMB
▷ Clock type: sine wave or square wave
▷ Input impedance: 50 Ω
▷ Input coupling: AC
▷ Input range: 1 Vpp to 2 Vpp
▷ Overvoltage protection: 2.5 Vpp
 Triggering
▷ Trigger sources:
    software 
    TRG IO (front panel SMB connector) 
    Analog trigger from CH0 - CH3 
    PXI Star (PXI version)
    PXI Trigger Bus[0..7] (PXI version)
    SSI (PCI version)
▷ Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger
 Data Storage and Transfer
▷ On-board memory: 512 MB, shared among the four AI channels
▷ Data transfer: scatter-gather DMA
 On-board Reference
▷ On-board reference voltage: +5 V
▷ Temperature drift: < 3 ppm/°C
▷ Recommended warm-up time: 15 minutes
 General Specifications
▷ I/O Connector
    BNC X4 for analog inputs
    SMB X2 for external digital trigger and external timebase input
▷ Dimensions (not including connectors)
    PCI-98x6: 167.6 mm (W) x 107 mm (H) (6.53" x 4.17")
    PXI-98x6: 160 mm (W) x 100 mm (H) (6.24" x 3.9")
▷ PCI Bus Interface
    PCI signaling: support 3.3 V and 5 V signaling
    PCI interface: 32-bit, 33/66 MHz 
▷ Ambient temperature (Operational): 
    0°C to 55°C (32˚F to 131˚F) (PXI version)
    0˚C to 50˚C (32˚F to 122˚F) (PCI version)
▷ Ambient temperature (Storage): -20˚C to 80˚C (-4˚F to 176˚F) 
▷ Relative humidity: 10% to 90% non-condensing
▷ Power Requirement, typical:
▷ Power Rails 
    3.3 V 5 V 12 V   
▷ PXI/PCI-9816 
    0.8 A 1.4 A 0.3 A
▷ PXI/PCI-9826 
    0.8 A 1.5 A 0.3 A
▷ PXI/PCI-9846
    0.8 A 2.0 A 0.3 A

Ordering Information

▷ PCI-9816H/512 
    10 MS/s ±5 V, ±1 V 5.1 MHz
▷ PCI-9826H/512 
    20 MS/s ±5 V, ±1 V 9.6 MHz
▷ PCI-9846H/512 
    40 MS/s ±5 V, ±1 V 20 MHz
▷ PCI-9846D/512 
    40 MS/s ±1 V, ±0.2 V 20 MHz
▷ PXI-9816D/512 
    10 MS/s ±-1 V, ±0.2 V 5.1 MHz
▷ PXI-9816H/512 
    10 MS/s ±5 V, ±1 V 5.1 MHz
▷ PXI-9826D/512 
    20 MS/s ±1 V, ±0.2 V 9.6 MHz
▷ PXI-9846D/512 
    40 MS/s ±1 V, ±0.2 V 20 MHz
▷ PXI-9846DW/512 
    40 MS/s ±1 V, ±0.2 V 80 MHz
▷ PXI-9846H/512 
    40 MS/s ±5 V, ±1 V 20 MHz