제품소개

제품소개

PCIe-7360

ㆍ▷ 100 MHz 32-CH High-Speed Digital I/O Card

ㆍ▷ 400 MB/s maximum throughput

ㆍ▷ Voltage level software selectable from 1.8 V, 2.5 V, and 3.3 V

ㆍ▷ Flexible handshake and external digital trigger modes

Manual

Data sheet

Features

▷ x4 lane PCI Express® Interface
▷ 8/16/24/32-CH at up to100MHz for DI or DO
▷ 8/16-CH at up to 200MHz for DI in external clock mode
▷ 400 MB/s maximum throughput
▷ Voltage level software selectable from 1.8 V, 2.5 V, and 
    3.3 V
▷ 80-step phase shift in external clock mode
▷ Per group (8-bit) input/output direction selectable
▷ Support for I2C and SPI programmable serial interfaces 
    for external device communication
▷ Scatter-gather DMA support
▷ Flexible handshake and external digital trigger modes
▷ 8-channel auxiliary programmable I/O

Specification & Introduction

 Digital I/O
▷ 32-channels, per group (8-channel) input/output 
    direction, with selectable logic levels: 1.8 V, 2.5 V, 
    3.3 V (software selectable)
▷ Power-up status: All digital inputs
▷ Impedance: 
    Input: 10 kΩ
    Output: 50 Ω
▷ Input protection: -1 to 6 V
▷ Data transfer: Programmable I/O, bus-mastering 
     DMA with scatter-gather
▷ Maximum data transfer rate: 400 MB/s
▷ Digital logic levels
    Logic Levels
    Digital Input 
        Min. input high voltage
        Max. input low voltage 
    Digital Output
        Min. output high voltage 
        Max. output low voltage 
        Max. output driving current 
    1.8 V     2.5 V     3.3 V
    1.2 V     1.6 V     2 V
    0.63 V     0.7 V     0.8 V
    1.6 V     2.3 V     3.1 V
    0.2 V     0.2 V     0.2 V
    8 mA     16 mA     32 mA
 Clocking Mode
▷ Internal clock: up to 100 MHz (100 MHz / N; 
    1<N<65535)
▷ External clock: up to 100 MHz (support 8/16/24/
    32-bit data width for DI/DO); up to 200 MHz 
    (support 8/16-bit data width for DI only)
▷ Handshake
▷ Burst handshake
 Trigger Sources
▷ Software trigger
▷ External digital trigger: AFI[0…7]
 Trigger Modes
▷ Post trigger, Retrigger, Pattern match, Handshake
 Change of State Interrupt
▷ Interrupt sources: Any of 32 channels or a pre-define
    channel change-of-state
 Application Function I/O
▷ 8 channels
▷ Supported modes: static I/O, I²C or SPI master 
     node, external clock input/output, external digital 
     trigger input, handshake

Ordering Information
    
▷ PCIe-7360
    100 MHz 32-CH High-Speed Digital I/O PCI 
    Express® Card