제품소개

제품소개

PCI-9113A

ㆍ▷ 32-CH 12-Bit 100 kS/s Isolated Analog Input Card

ㆍ▷ Supports a 32-bit 5 V PCI bus

ㆍ▷ On-board 1 k-sample A/D FIFO

ㆍ▷ Bipolar or unipolar analog input ranges

Manual

Data sheet

Features
■ Supports a 32-Bit 5 V PCI bus
■ 12-Bit A/D resolution
■ Up to 100 kS/s sampling rate
■ 32-CH single-ended or 16-CH differential inputs
■ Onboard 1 k-sample A/D FIFO
■ Bipolar or unipolar analog input ranges
■ Programmable gains of x1, x10, x100
■ Automatic analog inputs scanning
■ Onboard low-pass filtering capability for analog inputs
■ 2500 VRMS optical isolation
■ Compact, half-size PCB

Specification & Introduction
Analog Input
■ Number of channels: 32 single-ended or 16
     differential
■ Resolution: 12 Bit
■ Conversion time: 8 µs
■ Maximum sampling rate: 100 kS/s
■ Input signal ranges
    1  ±10 V  ±5 V   0 to 10 V
    10  ±1 V  ±0.5 V  0 to 1 V
    100  ±0.1 V  ±0.05 V  0 to 0.1 V
■ Accuracy: 0.01% of FSR ± 1 LSB
■ Input coupling: DC
■ Overvoltage protection: continuous ±35 V
■ Input impedance: 1 GΩ
■ Trigger modes: software
■ FIFO buffer size: 1 k samples
■ Data transfers: polling, interrupt
■ Isolation Voltage: 2500 VRMS
 General Specifications
■ I/O connector: 37-pin D-sub female
■ Operating temperature: 0˚C to 55˚C (32˚F to 131˚F )
■ Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F)
■ Relative humidity: 5% to 95%, non-condensing
■ Power requirements
    +5 V
    960 mA typical
■ Dimensions (not including connectors)
     173 mm x 107 mm (6.74” x 4.17”)

Ordering Information
■ PCI-9113A
    32-CH 12-Bit 100 kS/s Isolated Analog Input Card