제품소개

제품소개

AmITX-AL-I

ㆍ▷ Thin Mini-ITX Embedded board with Intel Atom® E3900 series, Pentium®, and Celeron® SoC (formerly codename: Apollo Lake)

ㆍ▷ Low-profile Thin Mini-ITX Embedded board

ㆍ▷ Intel VT-x/VT-d supported

ㆍ▷ Extreme Rugged operating temperature: -40°C to +85°C (build option for selected SKUs)

Data sheet

Features
● Low-profile Thin Mini-ITX Embedded board 
● Intel® VT-x/VT-d supported
● Up to 16GB non-ECC DDR3L memory at 1866/1600MHz in dual 
    stacked SODIMM socket 
● Intel® Gen9 Low Power graphics, up to 4k resolution and H.265 codec
● DisplayPort, HDMI, dual channel 18/24-bit LVDS (eDP by build 
    option), supports three independent displays
● Supports Smart Embedded Management Agent (SEMA®) 
    functions
● Extreme Rugged operating temperature: -40°C to +85°C 
    (build option for selected SKUs)

Specification & Introduction
 Audio
● Audio Codec 
    Realtek® ALC888S
● Interfaces
    Line-out, Mic-in on rear I/O
    7.1 channel signals and S/PDIF output on internal header
 Display
● Graphics Core
    Intel® Generation 9 Low Power Graphics Core Architecture supporting 3 
    independent and simultaneous display combinations of DisplayPort, HDMI, 
    LVDS or eDP outputs 
    Hardware encode/transcode (including HEVC)
    DirectX 12, DirectX 11.3, DirectX 10, DirectX 9.3 support
    OpenGL 4.3 and ES 3.0 support
    OpenCL 2.0 support
    Triple display: DP + HDMI + LVDS (default)
● DisplayPort 
    1x DisplayPort (2x DisplayPort is build option, one is in place of HDMI), 
    resolution up to 4096x2160@24Hz
● HDMI 
    1x HDMI (co-lay with DP), resolution up to 3840×2160@30 Hz
● LVDS
    Single/Dual channel 18/24-bit (build option, in place of eDP), resolution up to 
    1900x1200@ 60 Hz.
● eDP
    4 lane support (build option, in place of LVDS)
 Ethernet
    Controller: 2x Intel® Ethernet controller i211 (MAC/PHY)
    Note: Intel® Ethernet i210 (build option) is supported for -40°C to +85°C SKU 
    Interface: 10/100/1000 GbE connection
    Wake-on-LAN: Yes
 Power
    Standard Input: 12V ±5% from internal 4-pin power connector or 
    external DC jack
    Peripherals Output: Onboard headers for fan and SATA power
 Mechanical and Environmental
    Form Factor: Thin Mini-ITX
    Dimensions: 170 mm x 170 mm (L x W)
● Operating Temp.
    Standard Operating Temperature: 0°C to 60°C
    Extreme Rugged Operating Temperature: -40°C + 85°C (build option for 
    selected SKUs)
● Shock and Vibration
    MIL-STD-202G Method 214A, Table 214-I Condition D.
    MIL-STD-202G Method 213B, Table 213-I Condition A.
● Relative Humidity
    10% to 90%, non-condensing
● Certification
    CE, FCC, Class B
 Operating Systems
● Standard Support
    Windows 10 64-bit, Linux 64-bit
● Extended Support (BSP)
    Linux 64-bit, VxWorks 64-bit (TBD)

Ordering Information
● AmITX-AL-I-E3950 
    Thin Mini-ITX motherboard with Intel Atom® x7-E3950 
    1.6/2.0GHz (Burst Frequency), 12W (4C/1866)
● AmITX-AL-I-E3940
    Thin Mini-ITX motherboard with Intel Atom® x5-E3940 
    1.6/1.8GHz (Burst Frequency), 9.5W (4C/1866)
● AmITX-AL-I-E3930
    Thin Mini-ITX motherboard with Intel Atom® x5-E3930 
    1.3/1.8GHz (Burst Frequency), 6.5W (2C/1866)
● AmITX-AL-I-N4200
    Thin Mini-ITX motherboard with Intel® Pentium® N4200 
    1.1/2.5GHz (Burst Frequency), 6W (4C/1866)
● AmITX-AL-I-N3350
    Thin Mini-ITX motherboard with Intel® Celeron® N3350 
    1.1/2.4GHz (Burst Frequency), 6W (2C/1866)