제품소개

제품소개

TRC-8542 / 783699-02

ㆍ▷ CAN HS/FD 트랜시버 케이블

ㆍ▷ Full HS/FD CAN interface (up to 8 Mb/s) with onboard NXP TJA1043 transceiver

ㆍ▷ Compatibility with native NI-XNET port on cDAQ-9134/9135 controllers

ㆍ▷ Integrated support for signals from DBC, FIBEX, and AUTOSAR databases

Data sheet

Features
▷ Full HS/FD CAN interface (up to 8 Mb/s) with onboard NXP TJA1043 transceiver
▷ Compatibility with native NI-XNET port on cDAQ-9134/9135 controllers
▷ Integrated support for signals from DBC, FIBEX, and AUTOSAR databases
▷ NI-XNET driver for developing frame and signal applications in 
    LabVIEW, LabWindows™/CVI, and C/C++

Specification & Introduction
 High-Speed/Flexible Data-Rate CAN Characteristics
▷ Transceiver 
    NXP TJA1043T
▷ Max certified baud rate 
    5 Mbps1
▷ Input voltage limits CAN_H, CAN_L bus lines
    -27 VDC to +40 VDC
▷ Output voltage limit CAN_H, CAN_L bus lines
    5 VDC
▷ MTBF 
    Contact NI for Bellcore MTBF specifications
    at other temperatures or MIL-HDBK-217F
    specifications.
 Power Requirements
▷ Thermal dissipation (at 70 °C) 
    550 mW max (active mode); 440 mW typical
    (active mode)
▷ Power consumption from TRC-8542 host 
    550 mW max (active mode); 440 mW typical
    (active mode)
 Physical Characteristics
▷ To clean the TRC-8542, wipe it with a dry towel. Weight 
    70 g (2.5 oz)
▷ Length 
    447 mm to 462 mm (17.6 in. to 18.2 in.)
▷ D-Sub connector jackscrew maximum torque
    0.56 N · m (5.0 lb · in.)
 Safety
    Maximum Voltage2 Connect only the voltages that are within these limits.
▷ Port-to-COM 
    -27 VDC to +40 VDC max, Measurement Category I

Ordering Information