제품소개

제품소개

TRC-8546 / 783702-02

ㆍ▷ LIN 트랜시버 케이블

ㆍ▷ Full LIN interface (20 kb/s) with onboard NXP TJA1028 transceiver

ㆍ▷ Compatibility with native NI-XNET port on cDAQ-9134/9135 controllers

ㆍ▷ Integrated support for signals from LDF databases

Data sheet

Features
▷ Full LIN interface (20 kb/s) with onboard NXP TJA1028 transceiver
▷ Compatibility with native NI-XNET port on cDAQ-9134/9135 controllers
▷ Integrated support for signals from LDF databases
▷ NI-XNET driver for developing frame and signal applications in 
    LabVIEW, LabWindows™/CVI, and C/C++

Specification & Introduction
 LIN Characteristics
▷ Transceiver 
    NXP TJA1028
▷ Max certified baud rate 
    20 kbps
▷ LIN bus lines voltage 
    -40 VDC to +40 VDC
▷ Supply voltage range (VSUP) 
    +8 VDC to +18 VDC normal operating;
    -0.3 VDC to +40 VDC absolute limits
▷ MTBF 
    Contact NI for Bellcore MTBF specifications
    at other temperatures or MIL-HDBK-217F
    specifications.
 Power Requirements
▷ Thermal dissipation (at 70 °C) 
    650 mW max (active mode); 330 mW typical (active mode)
▷ Power consumption from NI-XNET Transceiver Cable host
    330 mW max (active mode); 150 mW typical (active mode)
▷ Power consumption from VSUP 
    320 mW max; 180 mW typical
 Physical Characteristics
▷ To clean the TRC-8546, wipe it with a dry towel. Weight 
    70 g (2.5 oz)
▷ Length 
    447 mm to 462 mm (17.6 in. to 18.2 in.)
▷ D-Sub connector jackscrew maximum torque
    0.56 N · m (5.0 lb · in.)
 Safety
    Maximum Voltage1 Connect only the voltages that are within these limits.
▷ Port-to-COM 
    -40 VDC to +40 VDC max, Measurement Category I

Ordering Information