제품소개

제품소개

GPIB-USB-HS+ / 783368-01

ㆍ▷ USB, 분석기 소프트웨어 포함, IEEE 488 GPIB 계측기 제어 디바이스

ㆍ▷ Transfer rates up to 1.8 MB/s (IEEE 488.1), 7.9 MB/s (HS488)

ㆍ▷ No GPIB cable requirement for instrument connection

ㆍ▷ High-performance controller/analyzer to troubleshoot GPIB hardware and software problems

Data sheet

Features
▷ Transfer rates up to 1.8 MB/s (IEEE 488.1), 7.9 MB/s (HS488)
▷ No GPIB cable requirement for instrument connection
▷ High-performance controller/analyzer to troubleshoot GPIB hardware and software problems

Specification & Introduction
 Performance
▷ GPIB
    3-wire 
        Up to 1830 Kbytes/s
    HS488
        Up to 7920 Kbytes/s
 Signaling
▷ GPIB
    3-wire, HS488
▷ USB 
    USB 2.0
 Power Requirements
▷ USB bus-powered device
    Maximum power consumption. 
        200 mA
    Typical power consumption
        80 mA
 Physical Characteristics
▷ Dimensions 
    8.0 cm × 6.1 cm × 2.0 cm
    (3.2 in. × 2.4 in. × 0.8 in.)
▷ Weight
    153 g (5.4 oz), includes USB cable weight
▷ I/O connector
    GPIB
        IEEE 488 24-pin connector
    USB 
        USB Standard Type A plug
▷ Jackscrew
    Thread
        M3.5 × 0.6
    Torque
        0.56 N · m (5.0 lb · in), maximum
 Environmental
▷ Operating ambient temperature 
    0 °C to 55 °C 
    (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.)
▷ Storage ambient temperature 
    -20 °C to 70 °C 
    (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.)
▷ Operating relative humidity
    10% to 90%, noncondensing 
    (Tested in accordance with IEC 60068-2-56.)
▷ Storage relative humidity
    5% to 95%, noncondensing 
    (Tested in accordance with IEC 60068-2-56.)
▷ Pollution Degree
    2
▷ Maximum altitude
    2,000 m (at 25 °C ambient temperature)
▷ Indoor use only

Ordering Information